Pressure Regulator
Place a pressure regulator on the irrigation supply line and record its input pressure, output pressure, and flow rate in the Inspector.
Pressure RegulatorA Pressure Regulator records the intended input pressure, regulated output and rated flow. These are entered design values; the app does not solve a live hydraulic pressure network.
Place the object
Open the Water Add panel and expand Sources & Supply. Choose Pressure Regulator, then click its position on the plan. The tool guide also provides Name and Position entry. Press Esc to stop placement.
Edit its properties
In Pressure Regulator, enter Input (kPa), Output (kPa) and Flow (L/min) for metric projects. Imperial projects use Input (psi), Output (psi) and Flow (gpm). Use the device specification and intended system design, rather than generic pressure assumptions.
Position and identify it
Use General → Name to identify the object and Location for its position. Length fields follow metric or imperial project settings. Locked objects cannot be edited until unlocked. Changes use drawing history.
Document the route
Draw the appropriate irrigation or drainage pipe route to show the intended arrangement. A nearby symbol alone is not proof of a working connection or a hydraulic calculation. The water tools document a schematic plan; they do not simulate real pressure or flow.