Water Source Point
Place the water supply entry point for an irrigation plan — a tap or pump — and set its source type and fixture style in the Inspector.
Water Source PointA Water Source represents the supply entry in an irrigation plan. Its type and fixture style document the intended connection; placing it does not automatically size or validate the downstream network.
Place the object
Open the Water Add panel and expand Sources & Supply. Choose Water Source, then click its position on the plan. The tool guide also provides Name and Position entry. Press Esc to stop placement.
Edit its properties
Select it and choose Source Type → Water Tap or Pump. Under Fixture Style, choose Hose Bib, Pump Housing or Well Head for its appearance.
Position and identify it
Use General → Name to identify the object and Location for its position. Length fields follow metric or imperial project settings. Locked objects cannot be edited until unlocked. Changes use drawing history.
Document the route
Draw the appropriate irrigation or drainage pipe route to show the intended arrangement. A nearby symbol alone is not proof of a working connection or a hydraulic calculation. The water tools document a schematic plan; they do not simulate real pressure or flow.